| How to Power on/off | 8
About this task
Procedure
Plug the base into a power supply using the supplied power adapter.
For WH62/WH63 base, all LEDs on the base light up and then go off.
For WH66/WH67, the power LED glows red.
Related information
WH66 Base & Headset Hardware
WH67 Base & Headset Hardware
Power on the Headset
Procedure
Do one of the following:
• Hold the Call Control button for 3 seconds.
• Power on the base and dock the headset in the base.
Note: The headset will be charged whenever it is docked in a base that is connected to a power
supply.
Related tasks
Power on the Base
Related information
Hardware Overview
To Next Page
Loading...
