Yeastar Technology NeoGate User Manual

NeoGate TG Series User Manual
http://www.yeastar.com 12/56
5. System
Click to access. In this page, we can configure the network settings, firewall rules
and some system preferences.
5.1 Network Preferences
5.1.1 LAN Settings
Figure 5-1
Items
Description
DHCP
If this option is set as yes, NeoGate TG will act as DHCP
client to get an available IP address from your local
network. We don’t recommend enabling this, as without
the right IP address you cannot access NeoGate TG.
Enable SSH
This is the advanced way to access the device. You can
use the software putty to access the device. In the SSH
access, you can do more advanced setting and debug. It’s
disabled by default.
We don’t recommend enabling it if not needed.
Port
The default is 8022; you can change it to another one.
Hostname
Set the host name for NeoGate TG
IP Address
Set the IP Address for NeoGate TG, It is recommended to
configure a static IP address for NeoGate TG
Subnet Mask
Set the subnet mask for NeoGate TG
Gateway
Set the gateway for NeoGate TG
Primary DNS
Set the primary DNS for NeoGate TG.
Secondary DNS
Set the secondary DNS for NeoGate TG
IP Address2
Set the second IP Address for NeoGate TG
Subnet Mask2
Set the second subnet mask for NeoGate TG

Yeastar Technology NeoGate Specifications

General

Brand	Yeastar Technology
Model	NeoGate
Category	Gateway
Language	English