NeoGate TG Series User Manual
http://www.yeastar.com 15/56
Enable DDNS
Select the DDNS server you sign up for service.
User name the DDNS server provides you.
The host name you have got from the DDNS server
Note: DDNS allows you to access your network using domain names instead of IP address.
The service manages changing IP address and updates your domain information
dynamically. You must sign up for service through dyndns.org, freedns.afraid.org,
www.no-ip.com, www.zoneedit.com
5.1.4 Static Route
NeoGate TG will have more than one internet connection in some situations but it has only
one default gateway. You will need to set some Static Route for NeoGate TG to force it to
go out through different gateway when access to different internet.
The default gateway priority of NeoGate TG from high to low is VPN/VLAN LAN port.
Figure 5-5
1) Route Table
The current route rules of NeoGate TG.
2) Static Route Rules
You can add new static route rules here.
The destination network to be accessed to by NeoGate TG.
Specify the destination network portion.
Define which gateway NeoGate TG will go through when
access to the destination network.
The cost of a route is calculated by using what are called
routing metric. Routing metrics are assigned to routes by
routing protocols to provide measurable statistic which can
be used to judge how useful (how low cost) a route is.
Define which internet port to go through.
To Next Page
Loading...
Need help?
General
