NeoGate TG Series User Manual
http://www.yeastar.com 48/56
Minimum duration (in seconds) of an IAX2 registration.
Default is 60 seconds
Maximum duration (in seconds) of an IAX2
registration. Default is 1200 seconds.
Enable the codec you want for IAX communication.
7.2.5 General Preferences
Figure 7-27
The global time out value for extensions, it’s 30 by
default.
The global max call duration setting for all
extensions, it’s 6000 by default.
Port used for HTTP sessions; Default: 80.
If you change this, please reboot to take effect.
Choose the customized two stage dialing prompt;
it’s disabled by default.
7.3 Routes Settings
To route the call to the correction destination, we should configure this page well, including
the mobile to IP and IP to mobile settings.
7.3.1 Mobile to IP
This is the route page specifying how to route the calls from GSM channel to IPPBX. There
is a default route here, and we can create a new one or edit the old one. There are two
modes for you to configure that.
To Next Page
Loading...
Need help?
General
