NeoGate TG Series User Manual
http://www.yeastar.com 17/56
5.2.2 Alert settings
If the device is under attack, the system will alert users via call or E-mail.
The attack modes include IP attack and Web Login.
Figure 5-9
1. IPATTACK
When the system is attacked by IP address, the firewall will add the IP to auto IP Blacklist
and notify the user if it match the protection rule.
1) Phone Notification Settings
Whether enable phone notification
The numbers could be set for alert notification, users can
setup multiple extension and outbound phone numbers.
Please separate them by “;”.
Example: “500;9911”, if the extension has configured
Follow Me Settings, the call would go to the forwarded
number directly.
Choose the GSM port to dial alert call.
The attempts to dial a phone number when there is no
answer.
The interval between each attempt to dial the phone
number. Must be longer than 3 seconds, the default value
is 60 seconds.
Users will hear the prompt while receiving the phone
notification.
2) E-mail Notification Settings
Note: Please ensure that all voicemail settings are properly configured on the System
Settings -> Voicemail Settings page before using this feature.
Whether enable E-mail Notification
The recipients for the alert notification, and multiple
email addresses are allowed, please separate them
by “;”.
Example: jerry@yeastar.com;jason@yeastar.com,
456@sina.com
The subject of the alert email.
Text content support for predefined variables. Variable
To Next Page
Loading...
Need help?
General
