TA410/810 User Manual
Note:
TA gateway is not the VLAN server, a 3-layer switch is still needed, please configure
the VLAN information there first, then input the details in TA gateway, so that the
packages via TA gateway will be added the VLAN label before sending to that switch.
Figure 3-5 VLAN Settings
Table 3-3 Description of VLAN Settings
Click the NO.1 you can edit the first VLAN over LAN
The VLAN Number is a unique value you assign to each
VLAN on a single device
Set the IP Address for TA gateway VLAN over LAN.
Set the Subnet Mask for TA gateway VLAN over LAN.
Set the Default Gateway for TA gateway VLAN over LAN
Click the NO.2 you can edit the first VLAN over LAN.
VLAN Number
The VLAN Number is a unique value you assign to each
Set the IP Address for TA410/810 VLAN over LAN.
Set the Subnet Mask for TA410/810 VLAN over LAN.
Set the Default Gateway for TA410/810 VLAN over LAN.
3.1.4 VPN Settings
A virtual private network (VPN) is a method of computer networking typically using the
public internet that allows users to privately share information between remote
locations, or between a remote location and a business' home network. A VPN can
provide secure information transport by authenticating users, and encrypting data to
prevent unauthorized persons from reading the information transmitted. The VPN can
be used to send any kind of network traffic securely. TA410/810 supports OpenVPN.
17/55
To Next Page
Loading...
Need help?
General
