EasyManuals Logo

Yeastar Technology TA410 User Manual

Yeastar Technology TA410
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
TA410/810 User Manual
Application Description
Connect IPPBX and TA FXO Gateway
YeastarTA FXO gateway is a solution to extend FXO ports for your IPPBX.
Two modes are available for you to connect IPPBX and TA FXO gateway, we call
them VoIP mode and SPS (Service Provider SIP)/SPX (Service Provider IAX) mode.
Three modes are available for you to connect your SIP server and TA410/810
gateway. We call them SIP Account Mode, VoIP Mode and SPS (Service Provider SIP)
Mode. You can choose any one of the 3 modes to connect your SIP server and
TA410/810. SPS Mode is recommended.
Account Mode:
Create one SIP account on TA410/810, and take the SIP account to register one SIP
trunk on your SIP server. Then TA410/810 and your SIP server are connected by the
account.
Calls from SIP to PSTN
1) Create one outbound route on your SIP sever, and select the SIP trunk you
have registered just now.
2) Configure a IP->Portroute on TA410/10, choose the SIP account in the field
“Call Source, and choose a PSTN trunk or PSTN trunk group in the field “Call
Destination”.
3) Make a call from your SIP Server and the call should match the outbound
route dial rules.
Calls from PSTN to SIP
1) Create an inbound route on your SIP server, and select the SIP trunk you
have registered just now.
2) Configure a Port->IProute on TA410/810, choose a PSTN trunk or PSTN
trunk group in the field “Call Source, and choose the SIP account in the filed
Call Destination”.
3) When a call comes to PSTN trunk on TA410/810, the call will be routed to the
destination of the SIP server inbound route.
Register SIP account on IP phone
With account mode, you can directly take the SIP account to register on your SIP
phone or softphone; then make calls from softphone though PSTN trunk on
TA410/810 and receive incoming calls on your SIP phone or softphone. In this
way, you don’t have to set up any SIP server.
VoIP Mode
Take a SIP account from your SIP server, and register it on TA410/810 as a VoIP trunk.
In this way, TA410/80 and your SIP server are connected.
Calls from SIP to PSTN
5/55

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yeastar Technology TA410 and is the answer not in the manual?

Yeastar Technology TA410 Specifications

General IconGeneral
BrandYeastar Technology
ModelTA410
CategoryGateway
LanguageEnglish

Related product manuals