Yeastar Technology TA410 User Manual

TA410/810 User Manual
4.6 Advanced Settings
4.6.1 Tone Zone Settings
Advanced ring tones for all the FXO ports can be configured on this page. There are
pre-grogrammed tone zone settings for some countries and regions. Users can simply
find and select thier country to get tone zone settings for the gateway.
Figure 4-22 Tone Zone Settings
Users may also configure the tone zone according to the national standard by
selecting "User custom for Tone Zone". Please refer to the document below and
configure the tone zone settings on TA410/810:
http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
Figure 4-23 Customize Tones
Table 4-17 Description of Tone Zone Settings
Items
Description
Country
Choose the country to get pre-programmed tone
zone settings or choose "User custom for Tone
Zone" to configure the settings manually.
Ring Cadence
Configuration option for all FXO ports ring cadence
for all incoming calls.
54/55

Yeastar Technology TA410 Specifications

General

Brand	Yeastar Technology
Model	TA410
Category	Gateway
Language	English