Yeastar Technology TA410 User Manual

TA410/810 User Manual
Another way to do auto provision is to download configuration file from the configured
server URL. Fill in the URL, user name, password, and set the time, TA410/810 will
get the configuration file from the server automatically and regularly.
Note: if there is no user name and password for the server, leave these fields blank.
Figure 3-29 Server Address
Other Settings for Auto Provision
• AES Key:
If the configruation file is encrypted by AES key, you need to fill the key in this
field.
• Always Apply:
Whether to check the new configuration and apply to TA410/810.
3.3.6 Firmware Update
Firmware upgrading is possible through the Administrator Web interface using a
TFTP Server or an HTTP URL.
Enter your TFTP Server IP address and firmware file location, then click "Start" to
update the firmware
Notes:
1. If “Reset configuration to Factory Defaults” is enabled, the system will restore to
factory default settings.
2. When updating the firmware, please don’t turn off the power. Or the system will get
damaged.
Figure 3-30 Firmware Update
32/55

Yeastar Technology TA410 Specifications

General

Brand	Yeastar Technology
Model	TA410
Category	Gateway
Language	English