TA410/810 User Manual
Figure 3-24 Email Settings
Table 3-12 Description of SMTP Settings
The E-mail Address that TA410/810 will use to send
The password for the email address used above
The IP address or hostname of an SMTP server that
connect to in order to send
voicemail messages via email, i.e.
mail.yourcompany.com.
SMTP Port: the default value is 25.
Use SSL/TLS to send
secure message to server
If the server of sending email needs to authenticate the
sender, you need to enable this
Note: Must be selected for Gmail or exchange server.
After filling out the above information, you can click on the “Test Account Settings”
button to check whether the setup is OK.
1) If the test is successful, you can use the email safely.
2) If test failed, please check if the above information is correct or if the network is
proper.
3.3.5 Auto Provision Settings
Three Methods are supported for Auto Provision: PNP, DHCP and you can manually
configure a server URL to get the configuration file from the server.
Figure 3-25 Auto Provision Methods
30/55
To Next Page
Loading...
Need help?
General
