3.15.1 How Save Memory
3.15 Setup for Memory Saving and Loading
The Memory function allows users to store welding parameters such as voltage, wire feed speed, and amperage settings under des-
ignated memory channels. These stored settings can be easily recalled, adjusted, and saved as needed for future use.
The system supports up to 50 memory slots for MIG/MAG welding, and 20 slots for Flux-cored, TIG, and Stick welding, ensuring
quick access to optimized parameters for various welding applications.
To save welding parameters, follow these steps:
1. Select Welding Processes
From the Home Menu, select the desired welding process and access the corresponding parameter settings page.
2. Set Parameters
Adjust the necessary parameters, such as material, torch trigger operation, voltage, wire feed speed, and advanced settings and so
on.
- 50 -
To Next Page
Loading...
