YOKOGAWA 2558A - 13.3 DIVider Group

13-4
IM 2558A-01EN
:DIVider?
Function Queries all output divider settings.
Syntax
:DIVider?
:DIVider:DENominator
Function Sets or queries the denominator of the output
divider.
Syntax
:DIVider:DENominator {<NRf>|MINimum|
MAXimum}
:DIVider:DENominator?
<NRf> = 4 to 15
MINimum: 4
MAXimum: 15
Example
:DIVIDER:DENOMINATOR 4
:DIVIDER:DENOMINATOR? -> 4
:DIVider:NUMerator
Function Sets or queries the numerator of the output
divider.
Syntax
:DIVider:NUMerator {<NRf>|MINimum|
MAXimum}
:DIVider:NUMerator?
<NRf> = 0 to 15
MINimum: 0
MAXimum: 15
Example
:DIVIDER:NUMERATOR 4
:DIVIDER:NUMERATOR? -> 4
Description You cannot specify a value greater than the value
you specified with the
:DIVider:DENominator
command (denominator).
13.3 DIVider Group
The commands in this group deal with the output divider settings. The commands correspond to the front panel m and n dials.