YOKOGAWA 2558A User Manual

13-11
IM 2558A-01EN
Commands
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
App
Index
:SYSTem?
Function Queries all the system settings.
Syntax
:SYSTem?
:SYSTem:BEEP
Function Sets or queries the beep sound on/off state.
Syntax
:SYSTem:BEEP <Boolean>
:SYSTem:BEEP?
ON|1: Enabled
OFF|0: Disabled
Example
:SYSTEM:BEEP ON
:SYSTEM:BEEP? -> :SYSTEM:BEEP 1
:SYSTem:EARTh
Function Sets or queries the LO terminal’s ground on/off
state.
Syntax
:SYSTem:EARTh <Boolean>
:SYSTem:EARTh?
ON|1: Ground
OFF|0: Not ground
Example
:SYSTEM:EARTH ON
:SYSTEM:EARTH? -> :SYSTEM:EARTH 1
:SYSTem:COMMunicate
Function Queries all the communication settings.
Syntax
:SYSTem:COMMunicate?
:SYSTem:COMMunicate:GPIB?
Function Queries all the GP-IB communication settings.
Syntax
:SYSTem:COMMunicate:GPIB?
:SYSTem:COMMunicate:GPIB:ADDress
Function Sets or queries the GP-IB address.
Syntax
:SYSTem:COMMunicate:GPIB:
ADDRess <NRf>
:SYSTem:COMMunicate:GPIB:ADDRess?
<NRf> = 0 to 30 (resolution: 1)
Example
:SYSTEM:COMMUNICATE:GPIB:ADDRESS 1
:SYSTEM:COMMUNICATE:GPIB:ADDRESS? ->
:SYSTEM:COMMUNICATE:GPIB:ADDRESS 1
Description If the /C1 option is not installed, executing this
command will result in error (241 Hardware
missing).
The response to this command is omitted in the
response to an upper-level query. An error will not
occur.
:SYSTem:COMMunicate:GPIB:TYPe
Function Sets or queries the GP-IB command type.
Syntax
:SYSTem:COMMunicate:GPIB:
TYPe {NORMal|COMPatible}
:SYSTem:COMMunicate:GPIB:TYPe?
NORMal: Standard commands that comply
with IEEE488.2-1992
COMPatible: Model2558 compatible
commands
Example
:SYSTEM:COMMUNICATE:GPIB:
TYPE COMPATIBLE
:SYSTEM:COMMUNICATE:GPIB:TYPE?
-> :SYSTEM:COMMUNICATE:GPIB:
TYPE COMPATIBLE
Description If the /C1 option is not installed, executing this
command will result in error (241 Hardware
missing).
The response to this command is omitted
in the response to an upper-level query. An
error will not occur.
:SYSTem:COMMunicate:ETHernet?
Function Queries all the Ethernet communication
settings.
Syntax
:SYSTem:COMMunicate:ETHernet?
:SYSTem:COMMunicate:ETHernet:DHCP
Function Sets or queries the Ethernet DHCP on/off
state.
Syntax
:SYSTem:COMMunicate:ETHernet:
DHCP <Boolean>
:SYSTem:COMMunicate:ETHernet:
DHCP?
ON|1: DHCP is enabled.
OFF|0: DHCP is disabled.
Example
:SYSTEM:COMMUNICATE:ETHERNET:
DHCP ON
:SYSTEM:COMMUNICATE:ETHERNET:
DHCP?
-> :SYSTEM:COMMUNICATE:ETHERNET:
DHCP 1
13.10 SYSTem Group
The commands in this group deal with communication, ground condition, and beep settings. The commands correspond to the front
panel SETUP menu commands.

YOKOGAWA 2558A Specifications

General

Brand	YOKOGAWA
Model	2558A
Category	AC Power Distribution
Language	English