3. Cabling
3-127
TI 33J01J10-01EN
lSpecicationsofFiber-opticCablesUsedinOpticalESBBusRepeater
Modules
repeater modules.
Table SpecicationsofFiber-opticCablesUsedinOpticalESBBusRepeaterModules
Item Specication
Connector Type LC connector (IEC 61754-20-compliant product)
Cable
IEC 60793-2-50B1.1)
Number of cores used Two
Note: If light attenuation between ANT411 and ANT512 is less than 3 dB, increase attenuation by 3 dB using an attenuator.
plus 20 °C or more.
allowable bending radius.
listed below:
• Node Unit
• Unit for optical bus repeater module
Oct. 5, 2018-00