2. Transportation, Storage and Installation
2-20
TI 33Q01J10-01E
2.5.3 Installing Cabinets in a Side-by-Side Arrangement
Install two or more cabinets in a side-by-side arrangement as described below.
Figure Example of Installing Cabinets in a Side-by-Side Arrangement
Installation
(a) Level the floor surface on which cabinets are to be installed.
(b) To install two or more cabinets in a line, install the central one first (D in Figure), and next
ones on both sides (C→B→A, E→F→G).
(c) With bottom plate (a) (see Figure on next page) off, install the cabinet in position, making
sure that the anchor bolt position and channel base hole align with each other.
(d) Tighten anchor bolt nut [A] (see Figure on next page) when the installation is complete.
When linking many cabinets in a row, tighten the nuts only finger-tight first, fully tightening
them when the cabinet interconnection is complete.
Nov. 20, 2003-00
To Next Page
Loading...
