2. Transportation, Storage and Installation
2-22
TI 33Q01J10-01E
Tools and Parts Required for Joining Cabinets
Connecting kit to install cabinets side by side. Table lists those parts needed to connect two
cabinets together.
- AKT211: Connection kit for Cabinet
Table Joining Parts and Tools (required per additional station)
No. Names Part numbers Quantity
a Nut or bolt (M12) (*1) – 4
b Spring washer (M12) (*1) – 4
c Flat washer (M12) (*1) – 4
d Hex hole bolt (M10) – (Cabinet accessory) 8
e Bolt (M8) Y9820NS 8
f Toothed (serrated) washer (M8) Y9801WL 16
g Nut (M8) Y9801BS 8
h L-shaped hex wrench S9103PB 2
*1: Parts “a” “b” and “c” need to be provided by the user.
Bolt
(Y9820NS)
Toothed washer
(Y9801WL)
Nut
(Y9801BS)
L-shaped hex wrench
(S9103PB)
F020410.ai
Figure Cabinet Connecting Parts
May 18, 2007-00
To Next Page
Loading...
