<2. Screens>
2-6
IM 12A01F01-03EN 2nd Edition : Feb. 19, 2019-00
2.2 Main screen
On Main screen, FLXA402 assigns sensor connection numbers to up to 8 measurements
respectively.
Main screen shows up upon startup when only one sensor connection (Sensor connection
On Home screen, tap a preferred sensor connection number to go to Main screen of the selected
sensor connection.
You can manipulate items’ position by tapping 2nd or 3rd item on Main screen. The tapped item
replaces itself with 1st item. (As for what 1st to 3rd represents, read the list below.)
NOTE
You can program positions where every 1 to 3 item to display (4.5.1 Display 1-1/1-2/1-3/1-4,
2-1/2-2/2-3/2-4 settings ) For instance, in pH measurement, by default, pH measurement value
appears at the position of 1st item (1st line), temperature value goes to the one for 2nd item (2nd
line), and the place for the 3rd item (3rd line) is blank.
E
F
(3)
A
C D
G
(2)
(5)
(1)
B
(4)(6)
H
Sample image of Main screen
A: 1st item measurement value (1st line)
B: 1st item unit (1st line)
C: Sensor connection number
*1
D: Display name (user programmable)
E: Additional text information of 1st item (Additional text 1)
F: 2nd 3rd item: measurement value (2nd, 3rd line)
G: Additional text information of 2nd, 3rd item (Additional text 2, 3)
H: Contact output (lights on only when the contact is being excited)
(1) “Home screen”
(2) “Converter menu”
(3) Favorite Calibration
(4) Sensor menu
(5) Page switch (next/previous)
(6) “Hold”, “Wash” (on display only in operation)
*1 If a converter is assigned in place of sensor, is displayed. (See 4.5.1)
screen.
To Next Page
Loading...
