<3. Converter menu>
3-10
IM 12A01F01-03EN 2nd Edition : Feb. 19, 2019-00
3.6 Lang. (Language)
Read 1.1 Language
3.7 Hold operation (manual Hold)
FLXA402 Hold function retains mA output (mA1/mA2/mA3/mA4) values at preset ones. By
default, Hold keeps values at “Last” set value.
For details on mA output, see 4.3 mA output settings.
On Converter menu, tap
to retain output.
A B
Figure 3.10 Manual Hold
A: appears during Hold. Tap again to release the function.
B:
appears in the B area which is not yet Hold. Tap to switch to into the A.
l During “Hold”
is displayed on Main screen of the sensor you selected in Process parameter slot. (See
4.3.1 Output)
Figure 3.11 “Hold” on Main screen
If you Tap again, a message pops up asking whether to release the function. After
You can create password to protect the operation. See 5.4 Password
To Next Page
Loading...
