<5. Others (Converter)>
5-17
IM 12A01F01-03EN 2nd Edition : Feb. 19, 2019-00
5.4 Password
Protect setting, calibration and others with password. Read 1.3 Passwordon how to establish
password.
Figure 5.19 Password
Both “Commissioning” and “Execute” boxes are blank by factory default.
If you leave the boxes blank, password is invalid to secure operation.
You can create a password with up to 12 characters.
CAUTION
Keep passwords safe.
After you create a password, you will be prompted to enter the password for each designated
appears on the screen.
If you enter correct password, you will see “Enter operator ID.”
Logbook database is created by saving Operator ID to identify those who entered the system.
However, you can skip and do without entering the Operator ID. Operator ID is created by 4
characters at maximum.
Figure 5.20 Password and Operator ID
5.5 Date/Time
To set date/time, see 1.2 Date/Time setting
Figure 5.21
To Next Page
Loading...
