<4. Setting converter>
4-20
IM 12A01F01-03EN 2nd Edition : Feb. 19, 2019-00
4.5 Display settings
Display related settings
4.5.1 Display 1-1/1-2/1-3/1-4, 2-1/2-2/2-3/2-4 settings
Home screen has two switchable pages, each of which displays up to 4 items to monitor.
Display 2-1
Display 2-2
Display 1-2
Display 1-4Display 1-3
Display 1-1
Figure 4.12 Home screen sample (4 process display (left), 2 process display (right))
Display X-Y: X-Page number Y- Display position e.g.1-1, 1-2.
Assign Display 1-1/1-2/1-3/1-4, 2-1/2-2/2-3/2-4 to each item to display.
l Process parameter slot
Determine sensors to display from “Sensor 1-1”, “Sensor 1-2”, “Sensor 1-3”, “Sensor 1-4”,
“Sensor 2-1”, “Sensor 2-2”, “Sensor 2-3”, “Sensor 2-4” Converter.
If you want to display a converter parameter (mA input, Script, arithmetic by multiple sensors), on
the line 1/2/3, select “converter.”
You can assign one sensor connection number to multiple Display X-Y.
For instance, if you place Sensor 1-1 on Display 1-1 and Display1-2, you can monitor two
1-1.
NOTE
Latest revision does not support arithmetic by multiple sensors, or script, either.
You need to assign MODBUS address to the sensors in advance. Read 4.6.1 MODBUS
setting
To Next Page
Loading...
