YOKOGAWA FLXA402 - Script

<4. Setting converter>
4-22
IM 12A01F01-03EN 2nd Edition : Feb. 19, 2019-00
l Favorite calibration
Available for only pH measurement. After setting a Favorite calibration, tap Favorite calibration

Option on Favorite calibration pH Calibration
Manual zero (1 point) pH Manual zero (1 pt)
Manual zero/slope (2 point) zero/slope(2 pts)
Manual zero/slope/ITP (3 pt) zero/slope/ITP (3 pts)
Manual zero/slope 1,2 (3 point) zerp/slope1,2 (3 pts)
Auto zero (1 point) pH Automatic zero (1 pt)
Auto zero/slope (2 point) zero/slope(2 pts)
Auto zero/slope/ITP (3 point) zero/slope/ITP (3 pts)
Auto zero/slope 1,2 (3 point) zerp/slope1,2 (3 pts)
󰀨 Calibration *
 󰀨 ”Calibration” leads you.
l Conductivity Unit, Resistivity Unit,
For only SC or ISC measurement.
Conductivity Unit: Auto, nS, µS, mS, S
  
4.5.2 Script
You can display the arithmetic result based on the scripts, setting up to 5 characters to “Script unit
strings”, 0 to 3 digits to “Script number decimal places”.
NOTE
