YOKOGAWA FLXA402 - Update Software

<5. Others (Converter)>
5-13
IM 12A01F01-03EN 2nd Edition : Feb. 19, 2019-00
5.1.9 Update software
You will update software with the SD card.
CAUTION



Insert the SD card into the memory card slot of FLXA402.
Go to Save/Load > “Update software”

Figure 5.16
Folder name has “/” at the end,




Software upgrade starts.

upgrade.
CAUTION
It takes 20 to 30 minutes to upgrade software. FLXA402 reboots automatically upon completion
of the upgrade. Don’t power down or pull out the SD card, which may cause damage.