<4. Setting converter>
4-30
IM 12A01F01-03EN 2nd Edition : Feb. 19, 2019-00
4.7 Error settings
one of
, , , lights on upon detection of each alarm, on Main screen or Home screen.
(Fault) or
Status Initial Description Alarm
NE107
Burn
out
On O
Failure F Signal invalid due to malfunction in the device, sensor or actuator Yes*
Function
check
C Signal temporarily invalid due to on-going work on the device.
No
Out of
S Permissible ambient or process conditions exceeded or the
measuring uncertainty of sensors or deviations from the set value
in actuators is probably greater than expected.
Maintenance
Required
M Although the signal is valid, the remaining life is nearly exhausted
or a function will soon be restricted due to operational conditions.
To Next Page
Loading...
