2-3
IM 01C50C05-01EN
2.3 Storage
When an extended storage period is expected, observe the following
precautions:
1. If at all possible, store the transmitter in factory shipped condition, that is,
in the original shipping container.
2. Choose a storage location that satises the following requirements.
• A location that is not exposed to rain or water.
• A location that is not exposed to direct sunlight.
• A location subject to a minimum of vibration or impact.
• The following temperature and humidity range is recommended.
Ordinary temperature and humidity (25°C, 65%) are preferable.
Temperature: -40 to 85°C
Humidity: 0 to 95% RH (Non-Condensation)
2.4 ChoosingtheInstallationLocation
Although the temperature transmitter is designed to operate in a
vigorous environment, to maintain stability and accuracy, the following is
recommended:
(1) Ambient Temperature
It is preferable to not to expose the instrument to extreme temperatures
or temperature uctuations. If the instrument is exposed to radiation
heat a thermal protection system and appropriate ventilation is
recommended.
(2) Environmental Requirements
Do not allow the instrument to be installed in a location that is exposed
to corrosive atmospheric conditions. When using the instrument in a
corrosive environment, ensure the location is well ventilated. The unit
and its wiring should be protected from exposure to rainwater and direct
sunlight.
(3) Impact and Vibration
It is recommended that the instrument be installed in a location that is
subject to a minimum amount of impact and vibration.
To Next Page
Loading...
Need help?
General
