YOKOGAWA YTA Series User Manual

1-3
IM 01C50C05-01EN
■ForSafeUseofProduct
Please give your attention to the followings.
(a) Installation
• The instrument must be installed by an expert engineer or a skilled
personnel. The procedures described about INSTALLATION are not
permitted for operators.
• All installation shall comply with local installation requirement and local
electrical code.
(b) Wiring
• The instrument must be installed by an expert engineer or a skilled
personnel. The procedures described about WIRING are not permitted
for operators.
• Please conrm that voltages between the power supply and the
instrument before connecting the power cables and that the cables are
not powered before connecting.
(c) Maintenance
• Please do not carry out except being written to a maintenance
descriptions. When these procedures are needed, please contact
nearest YOKOGAWA o󰀩ce.
(d) Modication
• Yokogawa will not be liable for malfunctions or damage resulting from
any modication made to this instrument by the customer.
(e) Product Disposal
• The instrument should be disposed of in accordance with local and
national legislation/regulations.
(f) Authorized Representative in EEA
• In relation to the CE Marking, The authorized representative for this
product in the EEA (European Economic Area) is:
Yokogawa Europe B.V.
Euroweg 2, 3825 HD Amersfoort,The Netherlands

YOKOGAWA YTA Series Specifications

General

Brand	YOKOGAWA
Model	YTA Series
Category	Transmitter
Language	English