1-2
IM 01C50C05-01EN
■NotesontheUser’sManual
• This manual should be delivered to the end user.
• This manual and the identication tag attached on packing box are
essential parts of the product; keep them in a safe place for future
reference.
• The information contained in this manual is subject to change without
prior notice.
• The information contained in this manual, in whole or part, shall not be
transcribed or copied without notice.
• In no case does this manual guarantee the merchant ability of the
transmitter or its adaptability to a specic client need.
• Should any doubt or error be found in this manual, submit inquiries to
your local dealer.
• No special specications are contained in this manual. When products
whose sux code or optional codes contain code “Z” and an exclusive
document is attached, please read it along with this manual.
• Changes to specications, structure, and components used may not lead
to the revision of this manual unless such changes aect the function and
performance of the transmitter.
■NotesonSafetyandModications
• This product is designed to be used by a person with specialized
knowledge.
• Before handling the YTA70P, it is absolutely imperative that users of this
equipment read and observe the safety instructions mentioned in each
section of the manual in order to ensure the protection and safety of
operators, the YTA70P itself and the system containing the transmitter.
We are not liable for any accidents arising out of handling that does not
adhere to the guidelines established in the safety instructions.
■NotesonFactorysettings
• Model YTA70P is shipped with the ordering settings from the factory.
The label information is shown in Chapter 2.1. The factry setting
information refer to Chapter 7.1.
To Next Page
Loading...
Need help?
General
