<10. Other Functions>
10-34
IM 11M12G01-02EN 1sh Edition : Mar. 25, 2021-00
Item Initialization Parameter Default setting
Sensor setting Device settings Choice of moisture base Wet
Selection of detector
ZR22 (PT1000: Ohm)
Input temp./press.
setting
Humidity model
setting
Temperature input
selection
Preset value
Input temperature setting 300°C
4mA input temperature
value
0°C
20mA input temperature
value
1000°C
Temp. upper limit alarm
value
1000°C
Temp. lower limit alarm
value
0°C
Exhaust gas pressure 101.33 kPa
Fuel setup Exhaust water vapor content 0.00 m
3
/kg
Theoretical air volume 1.00 m
3
/kg
X value 1.00
Absolute humidity of outside air 0.0000 kg/kg
Power settings Power supply voltage Auto
 Auto
To Next Page
Loading...
Need help?
General
