<2.Specications>
2-2
IM 11M12G01-02EN 1sh Edition : Mar. 25, 2021-00
Safety :
CE EN 61010-1
EN 61010-2-030
UL UL61010-1:2nd Edition
CSA CAN/CSA-C22.2 No. 61010-1
GB GB30439 Part 1
CE EN 61010-1/A1
EN 61010-2-030
UL UL61010-1:3rd Edition, AMD1
UL61010-2-030:1st Edition
CSA CAN/CSA-C22.2 No. 61010-1+Amd1
CAN/CSA-C22.2 No. 61010-2-030
GB GB30439 Part 1
EMC:
CE EN 61326-1 Class A Table 2
EN 61326-2-3,
EN 61000-3-2
RCM EN 55011 Class A, Group 1
KC KN11 Class A Group1, KN61000-6-2
Note · This instrument is a Class A product, and it is designed for use in the industrial environment. Please use this
instrument in the industrial environment only.
RoHS:
Others:
REACH Regulation EC 1907/2006
Information of the WEEE Directive
only and, therefore, is out of scope of the WEEE Directive. The WEEE Directive is only
valid in the EU.
n STANDARD SPECIFICATIONS (High Temperature Humidity Analyzer)
Measurement Object: Water vapor (in vol%) in mixed gases (air and water vapor)
Measurement System: Zirconia system
Measurement Range: 0.01 to 100 vol% O
2
,0 to 100 vol% H
2
O or 0 to 1.000 kg/kg
Setting Range: Any setting in the range
2
(in 1 vol% O
2
),or partial range.
2
O (in 1 vol% H
2
O), or partial range.
2
,
2
O
must be inputted to the converter.
Warming-up Time: Approx. 20 min.
Repeatability: (Excluding the case where the reference gas is by natural convection)
±1 vol% H
2
Linearity: (Excluding standard gas tolerance and the case where the reference gas is by natural
convection)
(Use oxygen of known concentration (in the measuring range) as the zero and
span calibration gas.)
± 2 vol% H
2
± 3 vol% H
2
convection.)
Both zero and span ± 3 vol%H
2
O/month
To Next Page
Loading...
Need help?
General
