iii
IM 11M12G01-02EN 1sh Edition : Mar. 25, 2021-00
Table of Contents
Chapter Outline
Relates to
Installation Operation
Maintenance
1. Overview
B C B
A B B
3. Installation A C
4. Piping
Examples of piping in three standard system
A C
5. Wiring
Wiring procedures such as “Power supply
wiring”, “output signal wiring” or others
A C
6. Components
Major parts and function are described in
this manual
C B B
7. Startup
Basic procedure to start operation of
Zirconia Oxygen/Humidity Analyzer,
Converter. Chapter 7 enables you to
A C
8. Detailed Data Setting Details of key operations and displays B C
9. Calibration
Describes the calibration procedure
B C
10. Other Functions Other functions described B A
11. Inspection and
Maintenance
How to conduct maintenance of Zirconia
Oxygen/Humidity Analyzer, Converter and
procedures for replacement of deteriorated parts
B A
12. Troubleshooting
This chapter describes measures to be
taken when an abnormal condition occurs.
C B
CMPL (parts list) User replaceable parts list C A
C: Recommended to read it at least once.
n For the safe use of this equipment
WARNING
Handle it with care. Be sure not to accidentally drop it.
Handle safely to avoid injury.
for maintenance or other reasons, protect yourself from potential poisoning by using a protective
mask or ventilating the area well.
CAUTION
The cell (sensor) at the tip of the detector is made of ceramic (zirconia element). Do not drop
the detector or subject it to pressure stress.
• Do NOT allow the sensor (probe tip) to make contact with anything when installing the
detector.
• Avoid any water dropping directly on the probe (sensor) of the detector when installing it.
• Check the calibration gas piping before introducing the calibration gas to ensure that there
is no leakage of the gas. If there is any leakage of the gas, the moisture drawn from the
sample gas may damage the sensor.
• The detector (especially at the tip) becomes very hot. Be sure to handle it with gloves.
To Next Page
Loading...
Need help?
General
