The Other YN-622C User Guide v.4.09
11/12/2014 Page 7 of 64
Useful Stuff ........................... 47-63
Canon External Flash Menus....48-50
2007 style menus
2012 style menus
Lighting Scenarios ....................51-54
E-TTL Ratio
Manual Levels
Augmented Ambient
Basic
Remotely Adjusting Augmenting Flash
Remotely Turning Off Augmenting
Using Class 4 Flashes as Augmenting
Manual Control of 4 Zones
Two-Shooter Setup
Class 5 Studio Flashes with Cybersync
Suggestions ...............................55-56
Batteries
Battery Orientation
Camera’s Custom/My Menu
Hybrid Mode
Light Meter Technique
Mixing with Other Triggers
Wireless Mode Setting
Umbrella/Light Stand Mount
Trouble Shooting .......................57-58
Aperture not displayed
Cold Temperatures
Erratic Behaviour
External Flash Menu
E-TTL Over/Under Exposure
E-TTL Automatic Adjustments
Fails to Power On
Firing Groups
Flash Not Firing
Flash Emits Pre-flash
Flash Zoom cannot be set
Full-power Flash
Gap between Pre-flash and Main Flash
Half Shutter
On-TX Flash Not Firing
Unable to Set Channels 5-7
Servicing.....................................59-62
AF-Assist Beam
Hot-Foot
Solder Joints
Opening the Case
Case Repair
What’s Inside the Cases?
Other Resources.............................63
Sorry – no Index, but use Ctl-F to search
To Next Page
Loading...
