JOHNSON CONTROLS
20
FORM 160.78-O2
ISSUE DATE: 5/22/2017
SECTION 2 - OPTIVIEW CONTROL CENTER INTRODUCTION
VSD
A detailed view of the motor and VSD parameters.
This allows programming of the Current Limit and the
Pulldown Demand Limit values.
Setpoints
This screen provides a single location to program the
most common system setpoints. It is also the gateway
to many of the general system setup parameters such as
Date/Time, Display Units, Scheduling, Printer Setup, etc.
History
This screen provides access to a snapshot of system
data at each of the last 10 shutdown conditions, and
provides for trending operating parameters.
To Next Page
Loading...
