JOHNSON CONTROLS
69
SECTION 2 - OPTIVIEW CONTROL CENTER INTRODUCTION
FORM 160.78-O2
ISSUE DATE: 5/22/2017
2
OVERVIEW
This screen displays information pertinent to the Motor
Temperature Monitoring feature. The feature consists
of motor winding temperature and motor housing tem-
perature. Also, individual winding temperature sensors
can be disabled on this screen.
DISPLAY ONLY
Motor Run (LED)
Illuminates when the Optiview control center is com-
manding the motor to run.
MOTOR DETAILS SCREEN
LD14859
FIGURE 30 - MOTOR DETAILS SCREEN - GAS PATH REVISION "A"
LD14859a
FIGURE 31 - MOTOR DETAILS SCREEN - GAS PATH REVISION "B"
To Next Page
Loading...
