York OPTIVIEW - Variable Geometry Diffuser Setpoints Screen

JOHNSON CONTROLS
49
SECTION 2 - OPTIVIEW CONTROL CENTER INTRODUCTION
FORM 160.78-O2
ISSUE DATE: 5/22/2017
2
OVERVIEW
The Variable Geometry Diffuser and prerotation vane
setpoints are maintained on this screen.
The following elds require login access
level of SERVICE. Service technicians re-
fer to YORK YMC
2
Service Manual (Form
160.78-M2) for operation instructions
and explanations of all programmable
setpoints and displayed values.
VARIABLE GEOMETRY DIFFUSER SETPOINTS SCREEN
LD16115
FIGURE 20 - VARIABLE GEOMETRY DIFFUSER SETPOINTS SCREEN - GAS PATH REVISION "A"
LD16116
FIGURE 21 - VARIABLE GEOMETRY DIFFUSER SETPOINTS SCREEN - GAS PATH REVISION "B"