York YST - Page 105

JOHNSON CONTROLS
105
SECTION 2 - OPTIVIEW CONTROL CENTER INTRODUCTION
FORM 160.67-O1
ISSUE DATE: 4/1/2015
2
Change Setpoints
Access Level Required: SERVICE
This key enables the field selection cursor. The operator
may then toggle between the programmable data fields
using the Cursor Arrow keys.
NAVIGATION
Home
Access Level Required: VIEW
Causes an instant return to the Home Screen.
Setpoints
Access Level Required: VIEW
Causes an instant return to the Setpoints Screen.
Configuration Setpoints
Access Level Required: VIEW
Causes an instant return to the Configuration Setpoints
Screen 1.
Time Setpoints
Access Level Required: VIEW
Moves to a sub-screen that allows programming of
various time delays pertaining to the operation of the
chiller.
Speed Setpoints
Access Level Required: VIEW
Moves to a sub-screen that allows programming of
various speed thresholds pertaining to the operation of
the chiller.
Ramp Rate Setpoints
Access Level Required: VIEW
Moves to a sub-screen that allows programming of
various speed setpoint and valve control signal ramp
rates pertaining to the operation of the chiller.