York YST - [VGD] Hold (Manual)

JOHNSON CONTROLS
40
FORM 160.67-O1
ISSUE DATE: 4/1/2015
SECTION 2 - OPTIVIEW CONTROL CENTER INTRODUCTION
Diffuser Gap Control Mode
Indicates whether the VGD is under manual or auto-
matic control.
PROGRAMMABLE
[VGD] Open (Manual)
Access Level Required: SERVICE
This key puts the VGD in manual mode and sends an
open command to the VGD.
[VGD] Close (Manual)
Access Level Required: SERVICE
This key puts the VGD in manual mode and sends a
close command to the VGD.
[VGD] HOLD (MANUAL)
Access Level Required: SERVICE
This key puts the VGD in manual mode and sends a
hold command to the VGD.
NAVIGATION
Home
Access Level Required: VIEW
Causes an instant return to the Home Screen.
Compressor
Access Level Required: VIEW
Causes an instant return to the compressor Screen.
VGD Setpoints
Access Level Required: SERVICE
Moves to the subscreen that allows programming of
the Variable Geometry Diffuser setpoints.