Printer Configuration and Adjustment
Changing Printer Settings
98
P1056468-002 7/3/13
Subnet Mask View or Set the Subnet Mask
View and, if necessary, change the subnet mask.
This menu item appears only if a wired or wireless print server is installed on your
printer. To save changes to this setting, set
IP PROTOCOL to PERMANENT, and then
reset the print server (see Reset Network on page 99).
Accepted values:
000 to 255 for each field
Related ZPL command(s):
^ND
SGD command used: Wired: internal_wired.ip.netmask
external_wired.ip.netmask
Wireless: wlan.ip.netmask
Control panel menu item: SUBNET MASK on page 34
Printer web page:
View and Modify Printer Settings >
Network Communications Setup >
TCP/IP Settings > Subnet Mask
Default Gateway View or Set the Default Gateway
View and, if necessary, change the default gateway.
This menu item appears only if a wired or wireless print server is installed on your
printer. To save changes to this setting, set
IP PROTOCOL to PERMANENT, and then
reset the print server (see Reset Network on page 99).
Accepted values:
000 to 255 for each field
Related ZPL command(s):
^ND
SGD command used: Wired: internal_wired.ip.gateway
external_wired.ip.gateway
Wireless: wlan.ip.gateway
Control panel menu item: DEFAULT GATEWAY on page 34
Printer web page:
View and Modify Printer Settings >
Network Communications Setup >
TCP/IP Settings > Default Gateway
MAC Address View the MAC Address
View the Media Access Control (MAC) address of the print server that is installed in the
printer (wired or wireless).
Accepted values:
N/A
Related ZPL command(s):
none
SGD command used: Wired: internal_wired.mac_addr
external_wired.mac_addr
Wireless: wlan.mac_addr
Control panel menu item: MAC ADDRESS on page 34
Printer web page: none
Table 9 • Network Settings (Continued)
To Next Page
Loading...
Need help?
General
