Accessories
52
10.Feed the new hand strap through the slot at the Power Pack opening.
Figure 55 Feed New Strap
11.Slide pad onto hand strap with the stylus holder facing up.
12.Fold the eyelet end of the strap up and press hook and loop material together.
Figure 56 Secure Eyelet End
13.Rotate disk 180° so that the empty slot is aligned with the Power Pack opening.
14.Feed strap through the slot.
Eyelet
Hook
Material
Hook
Material
Power Pack
Opening
Hand Strap Disk
Disk Slot
Disk Slot
Stylus
Holder
Pad
To Next Page
Loading...
