Accessories
122
Figure 84 Align Insert with Cradle
2. Press the insert down until it seats flush in the cradle.
Charging the Device
To charge the device in the Charge Only Cradle:
1. Align the device with the alignment pins on the cradle.
2. Insert the device into the cradle.
NOTE: Ensure the tablet is flat on the cradle and all charging contacts are touching the charging base.
Figure 85 Insert device into Charge Only Cradle
3. The device Charging LED indicates charging.
4. To remove the device from the Charge Only Cradle, hold the cradle down with one hand and lift the device.
To Next Page
Loading...
