Wireless
97
2. Touch Security & location.
3. Touch SIM card lock.
4. Touch Lock SIM card.
5. Enter the PIN associated with the card. Touch OK.
6. Reset the device.
Configuring the Access Point Name
NOTE: Many service provider Access Point Name (APN) data are pre-configured in the device. The APN information for all
other service provides must be obtained from the wireless service provider.
To use the data on a network, configure the APN information:
1. Swipe down with two fingers from the status bar to open the quick access panel and then touch .
2. Touch Network & Internet > Mobile network > Advanced.
3. Touch Access Point Names.
4. Touch an APN name in the list to edit an existing APN or touch to create a new APN.
5. Touch each APN setting and enter the appropriate data obtained from the wireless service provider.
6. When finished, touch > Save.
7. Touch the radio button next to the APN name to start using it.
8. Touch .
To Next Page
Loading...
