Getting Started
28
NOTE: To change the Home screen rotation, see Setting Home Screen Rotation.
4. Touch .
Touch Panel Mode
The device display is able to detect touches using a finger, a conductive-tip stylus, or gloved finger.
NOTE: A glove can be made of medical latex, leather, cotton, or wool.
For optimal performance use a Zebra certified stylus.
1. Swipe down from the Status bar to open the Quick Settings bar and then touch .
2. Touch Display > Advanced.
3. Touch Touch panel mode.
Figure 17 Touch Panel Mode Dialog Box
4. Select:
a. Finger Only Mode - Moisture optimized - Rain Mode to use a finger on the screen and when the
device may have water on the screen.
b. Stylus and Finger to use a finger or a stylus on the screen.
c. Glove and Finger to use a finger or a gloved finger on the screen.
5. Touch .
General Sound Setting
Use the Sound settings to configure media and alarm volumes.
To access sound settings:
1. Swipe down from the Status bar to open the Quick Settings bar and then touch .
2. Touch Sound.
3. Touch an option to set sounds.
To Next Page
Loading...
