Zebra ET51 - Getting Started

Getting Started
16
Figure 3 Bottom View
Getting Started
In order to start using the device for the first time:
• Install microSD card
• Install nano SIM Card (ET56 only)
• Charge the device
• Perform basic configuration.
Table 4 Bottom View
Item Description
12 NFC Antenna Position - Use to read NFC cards.
13 Stereo Speakers - Provides audio playback.
14 Alignment Holes - Use to align tablet with cradle
15 Latching Slots - Insertion point for Communication and Charging cradle locks.
16 Charging Pins - Contact point for cradle charging.
17 Docking Connector - Interfaces with the cradle.
13
14
12
8.4" Version
10.1” Version
13
17
15
16
13
16
15
14