Applications
62
Device Central
Device Central displays detailed information about the device and connected peripherals and supports the
following Zebra devices:
Device Central features include:
• Discovering and pairing with supported peripherals via Bluetooth or corded connection.
• Paging a connected RS6000 Ring Scanner.
• Displaying the connection status of peripherals.
• Displaying information for a connected peripheral in the notification bar.
Figure 35 Device Central Screen
Touch Get Info to read the cradle information.
Scan and Pair Tab
Pairing to a Bluetooth peripheral is accomplished by one of the following methods:
• Scan and Pair
• Scan to Pair
• Manually Pairing.
Scan and Pair
To scan the peripheral Bluetooth barcode to pair:
1. In the Scan and Pair tab, touch Scan barcode to pair. The peripheral’s scan beam illuminates.
2. Ensure that Bluetooth is enabled on the peripheral and is set to discoverable mode. Refer to the peripheral
user guide for instructions.
3. Scan the Bluetooth MAC address barcode label on the desired peripheral to pair.
When pairing is successful, the peripheral displays in the list. A green dot appears next to a Bluetooth
scanner when the device is connected, and may be in use. A red dot appears next to other Bluetooth
peripherals, such as a Bluetooth headset or printer, while they are connected but not in use.
To Next Page
Loading...
