Zebra G SERIES Service Manual

11
Cleaning and Maintenance
Cleaning
8/27/08 Thermal Transfer G-Series
TM
Service Manual 980618-001 A
Figure 3 • Cleaning the Platen Roller
Allow the printer to dry for one minute before closing the dispenser door, media cover or
loading labels.

Zebra G SERIES Specifications

General

Print Method	Thermal Transfer
Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Maximum Print Length	39 inches (991 mm)
Media Sensors	Reflective, Transmissive
Media Length	39"/991 mm
Programming Languages	ZPL II
Connectivity	USB, Serial, Parallel, Ethernet (depending on model)