Zebra GC420t User Manual

COBISS System Management Zebra GC420t User Guide
© IZUM, 21. 1. 2014, VIF-NA-26-EN, V1.0 1/23
1 Introduction
This document presents the use of the printer (connecting to power supply, changing paper, etc.)
when working in the COBISS system.
2 Using the GC420t printer
2.1 Description
A detailed description of the GC420t printer can be found in the English manual at:
http://www.zebra.com/content/dam/zebra/manuals/en-us/printer/gc420t-ug-en.pdf.
Within the COBISS system, the Zebra GC420t printer can be installed on the VT510 terminal or
a personal computer (see Figures 1 and 2).
Figure 1: VT510 terminal and printer
Figure 2: Personal computer and printer
Three printer communication interfaces are installed in the printer by default:
 parallel,
 serial,
 USB.

Zebra GC420t Specifications

General

Print Method	Thermal Transfer and Direct Thermal
Resolution	203 dpi (8 dots/mm)
Storage Temperature	-40°F to 140°F (-40°C to 60°C)
Max Print Width	4.09 inches
Max Print Speed	4 inches per second
Max Print Length	39 inches
Memory	8 MB SDRAM; 8 MB Flash
Connectivity	USB, Parallel, Serial
Media Width	1.00 inch to 4.25 inches
Media Length	0.38"/9.6 mm to 39"/991 mm
Media Thickness	0.003"/0.08 mm to 0.007"/0.18 mm
Media Type	Roll-fed or fan-fold, die-cut or continuous with or without black mark, tag stock, continuous receipt paper, wristbands
Power Requirements	100-240 VAC, 50/60 Hz
Operating Temperature	40°F/5°C to 105°F/41°C
Humidity	10% to 90% non-condensing
Weight	3 lbs