Zebra LI2208 User Manual

A - 2 LI2208 PRODUCT REFERENCE GUIDE
Ignore Bar Code Configuration Disable 3-13
USB Polling Interval 3 msec 3-14
Fast HID Keyboard Disable 3-15
RS-232 Host Parameters
RS-232 Host Types Standard 4-6
Baud Rate 9600 4-8
Parity Type None 4-10
Stop Bit Select 1 Stop Bit 4-9
Data Bits (ASCII Format) 8-bit 4-10
Check Receive Errors Enable 4-9
Hardware Handshaking None 4-12
Software Handshaking None 4-14
Host Serial Response Time-out 2 sec 4-15
RTS Line State Low RTS 4-16
Beep on <BEL> Disable 4-16
Intercharacter Delay 0 msec 4-17
Nixdorf Beep/LED Options Normal Operation 4-18
Ignore Unknown Characters Send Bar Code 4-18
IBM 468X/469X Host Parameters
Port Address None Selected 5-4
Convert Unknown to Code 39 Disable 5-5
Ignore Beep Disable 5-5
Ignore Bar Code Configuration Disable 5-6
Keyboard Wedge Host Parameters
Keyboard Wedge Host Type IBM AT Notebook 6-4
Ignore Unknown Characters Send 6-5
Keystroke Delay No Delay 6-5
Intra-Keystroke Delay Disable 6-6
Alternate Numeric Keypad Emulation Enable 6-6
Quick Keyboard Emulation Enable 6-7
Table A-1 Standard Default Parameters Table (Continued)
Parameter Default
Page
Number
1
User selection is required to configure this interface and this is the most common selection.

Zebra LI2208 Specifications

General

Type	Handheld bar code reader
Wavelength	617 nm
Sensor type	Linear
Scanner type	1D
Read rate (max)	547 reads/s
Pitch reading angle	-65 - 65 °
Motion tolerance (cm/s)	63.5
Linear (1D) barcodes supported	Code 11, Code 128, Code 39, Code 93, EAN-13, EAN-8, GS1 DataBar Expanded, Interleaved 2 of 5, JAN, U.P.C.
2D (matrix & stacked) barcodes supported	Not supported
Input voltage	5 V
Power consumption	165 mA
Power source type	DC
Standard interfaces	RS-232
Connectivity technology	Wired
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
Certification	EMC FCC Part 15 Class B, ICES 003 Class B, IEC 60601-1-2 Environmental RoHS Directive 2002/95/EEC Electrical Safety C22.2 No. 60950-1, EN 60950-1, IEC 60950-1, UL 60950-1 LED Class 1
Product color	Black
Housing material	-
International Protection (IP) code	IP42
Sustainability certificates	RoHS

Weight and Dimensions

Depth	99 mm
Width	67 mm
Height	160 mm
Weight	140 g