Zebra TC700K - Creating a Rule; Defining a Rule

4 - 32 TC70x/TC75x Integrator Guide
4. Touch the Enable checkbox to enable ADF.
Creating a Rule
1. Touch .
2. Touch New rule.
3. Touch the Enter rule name text box.
4. In the text box, enter a name for the new rule.
5. Touch OK.
Defining a Rule
1. Touch the newly created rule in the Rules list.
Figure 4-21 Rule List Screen
2. Touch the Rule enabled checkbox to enable the current rule.
NOTE By default, Rule0, is the only rule in the Rules list.