5 - 4 TC70x/TC75x Integrator Guide
9. Touch Connect.
10. Touch .
Manually Adding a Wi-Fi Network
Manually add a Wi-Fi network if the network does not broadcast its name (SSID) or to add a Wi-Fi network when
out of range.
1. Swipe down with two fingers from the status bar to open the quick access panel and then touch .
2. Touch Wi-Fi.
3. Slide the Wi-Fi switch to the On position.
4. Touch > Add network.
5. In the Network name text box, enter the name of the Wi-Fi network.
6. In the Security drop-down list, select the type of security. Options:
• None
•WEP
• WPA/WPA2 PSK
• 802.1x EAP.
7. If the network security is None, touch Save.
8. If the network security is WEP or WPA/WPA2 PSK, enter the required password and then touch Save.
9. If the network security is 802.1x EAP:
• Touch the EAP method drop-down list and select PEAP, TLS, TTLS or LEAP.
• Touch the Phase 2 authentication drop-down list and select an authentication method.
• If required, touch CA certificate and select a Certification Authority (CA) certificate. Note: Certificates are
installed using the Security settings.
• If required, touch User certificate and select a user certificate. Note: User certificates are installed using
the Security settings.
• If required, in the Identity text box, enter the username credentials.
• If desired, in the Anonymous identity text box, enter an anonymous identity username.
• If required, in the Password text box, enter the password for then given identity.
10. Touch Save. To connect to the saved network, touch and hold on the saved network and select Connect to
network.
11. Touch .
NOTE By default, the network Proxy is set to None and the IP settings is set to DHCP. See Configuring for a
Proxy Server on page 5-5 for setting connection to a proxy server and see Configuring the Device to Use
a Static IP Address on page 5-6 for setting the device to use a static IP address.
NOTE By default, the network Proxy is set to None and the IP settings is set to DHCP. See Configuring for a
Proxy Server on page 5-5 for setting connection to a proxy server and see Configuring the Device to Use
a Static IP Address on page 5-6 for setting the device to use a static IP address.
To Next Page
Loading...
Need help?
General
