5 - 14 TC70x/TC75x Integrator Guide
Button Remapping
The TC70x/TC75x’s buttons can be programmed to perform different functions or shortcuts to installed
applications.
• Scan button
• Volume down button
• Volume up button
• PTT button.
Remapping a Button
1. Touch > .
2. Touch Key Programmer.
Figure 5-13 Key Programmer Screen
3. Select the button to remap.
4. Touch the BUTTON REMAPPING tab or the SHORTCUT tab that lists the available functions and applications.
5. Touch a function or application shortcut to map to the button.
NOTE It is not recommended to remap the scan button.
To Next Page
Loading...