Zebra TC700K User Manual

DataWedge 4 - 13
Touch Decoders. The Barcode input screen appears. A check in the checkbox indicates that the decoder is
enabled. By default the most commonly used decoders are enabled (shown below with an asterisk). The supported
decoders are:
NOTE DataWedge supports the decoders listed below but not all are validated on this device.
Table 4-1 Supported Decoders
Decoders Imager RS507 RS6000
Australian Postal Disabled Disabled Disabled
Aztec Enabled Enabled Enabled
Canadian Postal Disabled Not supported Disabled
Chinese 2 of 5 Disabled Disabled Disabled
Codabar Enabled Enabled Enabled
Code 11 Disabled Disabled Disabled
Code 128 Enabled Enabled Enabled
Code 39 Enabled Enabled Enabled
Code 93 Disabled Disabled Disabled
Composite AB Disabled Disabled Disabled
Composite C Disabled Disabled Disabled
Discrete 2 of 5 Disabled Disabled Disabled
Datamatrix Enabled Enabled Enabled
Dutch Postal Disabled Disabled Disabled
EAN-13 Enabled Enabled Enabled
EAN-8 Enabled Enabled Enabled
GS1 DataBar Enabled Enabled Enabled
GS1 DataBar Expanded Enabled Enabled Enabled
GS1 DataBar Limited Disabled Disabled Disabled
HAN XIN Disabled Not supported Disabled
Interleaved 2 of 5 Disabled Disabled Disabled
Japanese Postal Disabled Disabled Disabled
Korean 3 of 5 Disabled Disabled Disabled
MAIL MARK Enabled Not supported Enabled
Matrix 2 of 5 Disabled Disabled Disabled

Zebra TC700K Specifications

General

Brand	Zebra
Model	TC700K
Category	Handhelds
Language	English