EasyManua.ls Logo

Zenith Presentation H25D46DT - Computer Setup Troubleshooting

Zenith Presentation H25D46DT
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PAGE 46
206-4544 2/1/01
Computer Setup Troubleshooting:
Symptoms Possible Cause(s) Possible Solution(s) Page(s)
Computer Image
Poor or no computer picture. • Poor Connections. -Check all cable connections. 8
• TV/Computer not turned on. -Turn TV/Computer on.
• Wrong TV source selected. -Select the proper TV source the computer is connected to. 11
• 800 x 600 @60 HZ not set. -On the Computer, set display output to 800 x 600 @60 Hz. 6
• TV not adjusted to computer yet. -Wait until TV adjusts to computer image. 7
• Cable over 25 feet. -Set up Computer/TV where an excessively long cable is not needed.
Local interference. • Check for disturbing source. The following may cause image problems or distortion:
Electrical appliances, powerful lights, cars, trucks; computers or
portable phones; medical equipment
• Appliance too close to TV. -If possible increase the distance between your TV and computer
or computer. and the offending appliance. Or shut one of them off.
Fuzzy computer picture. • 800 x 600 @60 HZ not set. -On the computer, set display output to 800 x 600 @60 Hz. 6
Poor computer picture. • Computer display output is -See pages 9 or 10 for instructions to optimize computer’s image.
not optimized.
Some quick and easy tips to resolving problems using the Presentation TV as a Computer Monitor

Table of Contents

Related product manuals